Precautions for use of floor type bathtub faucet:
1. Pay attention to cleaning impurities during installation.
When the faucet of floor type bathtub is installed, the residual dirty water, residue, sand and impurities in the water pipe in the pipe shall be completely removed. It can avoid bubble blocking or valve core damage, jamming, blocking and leakage. At the same time, the surface shall be cleaned so that there is no residue of building materials.
2. Do not use too much force when switching.
For any kind of floor type bathtub faucet products, there is no need to use too much force when opening and closing the bathtub faucet. It only needs to be slightly screwed or moved. Even if it is a traditional floor type bathtub faucet, it doesn't take a lot of effort to wring it. In particular, do not use the handle as a handrail to support or use. The products with screen cover at the water outlet shall be disassembled and washed to remove impurities after being used for a period of time. The products equipped with hose shall pay attention to keep the hose in natural stretching state to avoid breaking.
3. The faucet of floor type bathtub should be extended.
The showerhead metal hose of the floor type bathtub faucet shall be kept in a natural stretch state, and shall not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention not to form a dead angle at the joint between the hose and the valve body, so as to avoid breaking or damaging the hose.
4. Pay attention to frequent cleaning.
The floor type bathtub faucet which is not used for a long time sometimes has the phenomena of incomplete closing, leakage, loose handle, loose connection mouth and water leakage, etc., which can be solved by consumers themselves in general. Clean the faucet surface with clean water and wipe it dry with soft cotton cloth before scrubbing, and then wipe it gently with neutral detergent to keep the surface clean. Do not use any abrasive detergent, hard cloth, paper towel or steel wire ball, and any acid, rough detergent or soap to wipe the faucet surface. Screen cleaning: remove the bubble head, take out the screen, and brush the screen with a toothbrush or small brush under the tap.
